•  
  •  
  •  
     
  •  
     
  •  
     
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
     
     
  •  
Print

RustPrufe Removable

Advanced Anti-Rust

Product Information
 
Description:
RustPrufe Advanced Anti-Rust is a temporary peelable protective coating designed to  protect steel and metal surfaces from damage caused by; flash rusting, abrasion, staining, spillage, weathering and scratching. The liquid applied coating dries to form a  tough waterproof film that will protect metal surfaces for up to 12 months. 
DO NOT USE ON ACRYLIC SURFACES.
Material Type: Water based.
Colour:
Clear. Also available in any colour pigment upon request. 
Health & Safety:
The compound is non-toxic and non-flammable in the wet state. The dry film waste may be disposed of as low hazard. 
Please see separate Material Safety Data Sheet (MSDS)
Storage:
Shelf life 24 months. Store at temperatures between 5°C - 25°C.
DO NOT ALLOW LIQUID TO FREEZE.
Surfaces:
Steel, metals and other porous surfaces.
Rust Inhibitor: RustPrufe has been formulated to include a flash rush inhibitor.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Application Information
 
Application:
The contents of the container should be mixed thoroughly before use. Always conduct a  test area and a test peel on each substrate before use. 
A minimum wet film thickness (WFT) of 250 Microns [100 Microns dry film thickness (DFT)] must be achieved, anything less may result in the product becoming  difficult to remove. Do not apply in wet or freezing conditions and protect from rainfall.
By Spray:
Apply with airless spray gun, using a 17 thou tip size and a box coat to achieve a minimum WFT of 250 Microns (100 Microns DFT).
By Lambswool Roller – Apply 2 coats, allowing 1st to tack off. Apply generously to  achieve a minimum WFT of 250 Microns (100 Microns DFT).
Tack Free Drying Time:
A WFT of 250 Microns will be tack free in approximately 120 minutes at room temperature. Force drying may be used by using moving air and increasing the surface temperature to a maximum of 50°C.
Coverage:
The theoretical coverage rate is approximately 5m2 per kg at a WFT of 250 Microns. 
Removal: The dry film can be easily removed either by hand peeling or by pressure hose. Do not  remove in freezing conditions as the coating may be brittle.
Weather Resistance:
RustPrufe is suitable for up to 12 months UV exposure. 
Clean Down:
Clean rollers and equipment with water immediately after use.
Repair: If the protective coating rips, repair by lifting the ripped patch and apply a fresh coat to  the underside and reseal. Alternatively, cut away the damaged area and apply a fresh coat.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Technical Information
 
Tensile Strength: >5 MPa
Viscosity: 18000 ± 2000 cP @ 20°C
Solids Content: 45 ± 2 %
Elongation: >1000 %
Flash Point: N/A
Adhesion: < 1.0 MPa
Density: 1.09 kgl-1 Maximum VOC: 80 gl-1 pH: 7-8

 

 

 
 
Print

RustPrufe Removable

Advanced Anti-Rust

Product Information
 
Description:
RustPrufe Advanced Anti-Rust is a temporary peelable protective coating designed to  protect steel and metal surfaces from damage caused by; flash rusting, abrasion, staining, spillage, weathering and scratching. The liquid applied coating dries to form a  tough waterproof film that will protect metal surfaces for up to 12 months. 
DO NOT USE ON ACRYLIC SURFACES.
Material Type: Water based.
Colour:
Clear. Also available in any colour pigment upon request. 
Health & Safety:
The compound is non-toxic and non-flammable in the wet state. The dry film waste may be disposed of as low hazard. 
Please see separate Material Safety Data Sheet (MSDS)
Storage:
Shelf life 24 months. Store at temperatures between 5°C - 25°C.
DO NOT ALLOW LIQUID TO FREEZE.
Surfaces:
Steel, metals and other porous surfaces.
Rust Inhibitor: RustPrufe has been formulated to include a flash rush inhibitor.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Application Information
 
Application:
The contents of the container should be mixed thoroughly before use. Always conduct a  test area and a test peel on each substrate before use. 
A minimum wet film thickness (WFT) of 250 Microns [100 Microns dry film thickness (DFT)] must be achieved, anything less may result in the product becoming  difficult to remove. Do not apply in wet or freezing conditions and protect from rainfall.
By Spray:
Apply with airless spray gun, using a 17 thou tip size and a box coat to achieve a minimum WFT of 250 Microns (100 Microns DFT).
By Lambswool Roller – Apply 2 coats, allowing 1st to tack off. Apply generously to  achieve a minimum WFT of 250 Microns (100 Microns DFT).
Tack Free Drying Time:
A WFT of 250 Microns will be tack free in approximately 120 minutes at room temperature. Force drying may be used by using moving air and increasing the surface temperature to a maximum of 50°C.
Coverage:
The theoretical coverage rate is approximately 5m2 per kg at a WFT of 250 Microns. 
Removal: The dry film can be easily removed either by hand peeling or by pressure hose. Do not  remove in freezing conditions as the coating may be brittle.
Weather Resistance:
RustPrufe is suitable for up to 12 months UV exposure. 
Clean Down:
Clean rollers and equipment with water immediately after use.
Repair: If the protective coating rips, repair by lifting the ripped patch and apply a fresh coat to  the underside and reseal. Alternatively, cut away the damaged area and apply a fresh coat.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Technical Information
 
Tensile Strength: >5 MPa
Viscosity: 18000 ± 2000 cP @ 20°C
Solids Content: 45 ± 2 %
Elongation: >1000 %
Flash Point: N/A
Adhesion: < 1.0 MPa
Density: 1.09 kgl-1 Maximum VOC: 80 gl-1 pH: 7-8

 

 

 
 

Technologies We Use

  • seal saver

     
  • turbowerx

     
     
     
  • Oil Watch

  •  
     
     
  •  
     
     
  • ATS Electrolube

  •  
  •